Question: How to make a break line in microstation?

If your question is Question: How to make a break line in microstation?, our CAD-Elearning.com site has the answer for you. Thanks to our various and numerous Microstation tutorials offered for free, the use of software like Microstation becomes easier and more pleasant.
Indeed Microstation tutorials are numerous in the site and allow to create coherent designs. All engineers should be able to meet the changing design requirements with the suite of tools. This will help you understand how Microstation is constantly modifying its solutions to include new features to have better performance, more efficient processes to the platform.
And here is the answer to your Question: How to make a break line in microstation? question, read on.

Introduction

1. Unpack the ZIP archive to a suitable location, such as ..OrganizationWorkspaceStandardsmacros.
2. Start the tool with the MicroStation keyin vba run [Breakline]modMain.main.
3. The tool pops its UserForm.

Similarly, how do you create a multi-line in MicroStation? To set up your multi-lines, select Element menu > Multi-line Styles. Profile/EndCaps and Joints tabs – Whether you want to change one of the lines, the caps or the way joints are handled. Level, Color, etc. – You can set the attributes of each line in the multi-line independent of the others.

Also, how do I change line spacing in MicroStation? Solution. This spacing is set in the Element> Dimension> Tolerance> Lower Margin dimension setting.

Beside above, how do you drop an element in MicroStation?

1. Select the element(s).
2. Select the Drop Element tool.
3. Turn on the appropriate tool settings to specify the element type(s) on which to operate.
4. Accept the settings and initiate the drop. Only the selected elements of the specified type(s) are dropped.

Best answer for this question, where are snaps in MicroStation? In MicroStation CONNECT there is no tool or menu option labeled Button Bar. To display the Snap Mode tool box do the following: Select the Snap icon on the MicroStation status bar has you have always done before. In the ribbon pop-up select the Snap Mode icon.

1. Select the Create Complex Shape tool.
2. Set Method to Manual.
3. Identify the first element.
4. Continue to identify elements to add to the shape. The elements are connected as they are identified, unless they already are connected.
5. If the first and last elements connect, accept the shape.

How do I change the linetype scale in MicroStation v8i?

1. Option 1: Model Properties dialog.
2. Option 2: Design File Settings dialog (Settings > Design File > Element Attributes)
3. Option 3: Key-in ACTIVE LINESTYLESCALE
4. See Also. Setting Linestyle Scale In MicroStation V8.

What is a smart line in MicroStation?

Place SmartLine is a tool that produces different type of elements depending on used setting. As Daniel Clark wrote, using Join elements checkbox you can define whether a line will be placed as one line string or as a series of independent lines.

Where is the drop tool in MicroStation?

Selecting the down arrow next to the Drop Element icon in the ribbon panel will present a drop down list of options. Selecting Drop Element will display the tool settings window with the options available in previous editions of MicroStation, plus a new option to use a fence.

How do you fillet in MicroStation?

How do you turn on snap points in MicroStation?

To set the Snap Mode via the status bar Click the Data button. The pop-up Snap Modes menu opens. A button with a filled black circle is displayed to the left of the active Snap Mode. While holding down the key, choose the desired Snap Mode by clicking it (or drag the pointer to it and release the Data button).

How do I turn on Accu snap in MicroStation?

To access the AccuSnap settings, go to the Settings > Snaps > AccuSnap command, or key-in: DIALOG ACCUSNAP. To toggle AccuSnap on and off key in: ACCUSNAP TOGGLE. This tab contains controls to enable or disable AccuSnap, and to define the way it operates.

How do I turn off grid snap in MicroStation?

From any view window’s control menu, choose View Attributes. The View Attributes dialog box opens. Turn Grid on or off. Click All.

What is a complex shape?

A complex shape is a single element comprised of multiple segments. Although a single line, arc, and point is rather easily identified, certain other elements are more difficult to assess.

How do you draw shapes in MicroStation?

What are simple and complex shapes?

A polygon is a closed figure made up of line segments. A simple polygon has only one boundary, and it doesn’t cross over itself. The sides of a simple polygon do not intersect. Complex polygon is a polygon whose sides cross over each other one or more times.

How do I set Ltscale in MicroStation?

(In MicroStation to adjust the LTSCALE keyin LTSCALE=x where x is a number). Note that changing the LTSCALE will impact on the display of any custom line style that you may have created and is like setting the ‘scale factor’ for a line style under the Line Styles dialog box, only globally for every line type!

Where is change attribute tool MicroStation?

1. Select the elements required to be changed.
2. Choose the ‘Change Element Attributes’ tool from the Ribbon ( or popup menu )
3. In the Tool Settings dialog, place a checkmark(s) against the attribute to change and select the required Attribute.

How do you flip a line style in MicroStation?

To change the direction of the line style: Go to Tools>Curves>Modify Curves>Change Curve Direction. Use this tool to select the line you want to change, then the direction you want it to move. The line will swap “direction” and the text will appear correct side-up.

How do I see attributes in MicroStation?

1. From the References dialog box select the Reference File in the dialog you want to work with.
2. From the Reference dialog box pull down menu Settings > Presentation.
3. Check ON Use View Flags.
4. Toggle ON or OFF the View Attributes you want for the reference file.

How do I change colors in MicroStation?

To change the background color go under Settings > Color Table. The Modify Color dialog box will come up. Once this is up select the desired color and then click OK.

Final Words:

I believe I covered everything there is to know about Question: How to make a break line in microstation? in this article. Please take the time to examine our CAD-Elearning.com site if you have any additional queries about Microstation software. You will find various Microstation tutorials. If not, please let me know in the remarks section below or via the contact page.

The article clarifies the following points:

• How do I change the linetype scale in MicroStation v8i?
• What is a smart line in MicroStation?
• Where is the drop tool in MicroStation?
• How do you fillet in MicroStation?
• How do I turn on Accu snap in MicroStation?
• How do you draw shapes in MicroStation?
• What are simple and complex shapes?
• Where is change attribute tool MicroStation?
• How do you flip a line style in MicroStation?
• How do I change colors in MicroStation?