How to make a void family in revit?

1. Create a new family using the Metric Generic Model face based.
2. Select the 3D Front view.
3. Click Create tab Datum panel (Reference Plane).
4. Place a new horizontal reference plane in the middle of the slab extrusion:
5. Select the new reference plane.
6. In the Properties palette:

Frequent question, how do you void a family in Revit?

Moreover, how do you create a void in Revit?

1. On the Create tab Draw panel, select one of the drawing tools.
2. Click in the drawing area, and draw a closed loop that intersects solid geometry.
3. Select the closed loop.
4. Click Modify | Lines tab Form panel Create Form drop-down (Void Form).

Correspondingly, how do you make a void wall in Revit family?

Likewise, how do you cut a nested family with a void? Select the cut tool in the Modify tab. First select the element to be cut and then the family instance to be cut with. After all drawn and cut as said before, you should be able to load the nested family into the project environment.

1. Create a new family using the Metric Generic Model face based.
2. Select the 3D Front view.
3. Click Create tab Datum panel (Reference Plane).
4. Place a new horizontal reference plane in the middle of the slab extrusion:
5. Select the new reference plane.
6. In the Properties palette:

How do you create a void sweep in Revit?

1. Click Modify | Sweep tab Sweep panel, and select a profile from the Profile list.
2. On the Options Bar, use the X, Y, Angle, and Flip options to adjust the position of the profile.
3. Click Apply.
4. Select the path, and in a 3D view, zoom in to see the profile.

How do you create a void extrusion?

Click in the drawing area, and draw a closed loop that intersects solid geometry. Select the closed loop. Click Modify | Lines tab Form panel Create Form drop-down (Void Form). A void form extrusion is created.

What is a wall void?

In exterior walls the void contains insulation, but is usually empty in interior walls. In kitchens and bathrooms wall voids can contain plumbing, and electric wires and cables are strung through most interior wall voids.

How do you cut a void in mass Revit?

How do you cut a void wall in Revit?

1. Edit the in place wall.
2. Create a new void extrusion that will define the opening.
3. Use the “Cut” tool and select the void geometry.
4. Finish the solid edition.

How do you make a niche wall in Revit?

How do you make a family cut the wall?

You need to open window / door family and play with voids. Those voids will cut the wall where you want that to happen.

What does cut with voids when loaded mean in Revit?

Autodesk Help. “Cut with Voids When Loaded: When selected, voids created in the family will cut through solids. The following categories can be cut by voids: ceilings, floors, generic models, roofs, structural columns, structural foundations, structural framing, and walls.”

How do you cut a shape in Revit?

Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.

Why is my void Orange in Revit?

From the book: “When you create a void form while in the Family Editor, it will appear in the 3D views as a transparent form and as orange lines in plan and elevation views, as long as it is not cutting any solid geometry.” So, if it’s not cutting anything, then it’ll be orange.

How do you make a boolean in Revit?

What is a sweep in Revit?

The line in the sweep defines the path along which the 2D profile is swept to create the 3D form. The profile consists of linework drawn perpendicular to the line or series of lines that define the path.

How do you create a solid form in Revit?

Select the lines. Click Modify | Form Element tab Form panel Create Form drop-down Void Form. A void form extrusion is created. (Optional) Click Modify | Form Element tab Form panel Solid Form to convert this form to a solid.

How do you perform a void extrusion in Revit?

How do you do extrusions in Revit?

1. In the Family Editor, on the Create tab Forms panel, do one of the following:
2. Use the sketching tools to sketch the extrusion profile:
3. On the Properties palette, specify the extrusion properties:
4. Click Modify | Create Extrusion tab Mode panel (Finish Edit Mode).
5. To view the extrusion, open a 3D view.

How do you assign a material to an extrusion in Revit?

To apply a material to a solid extrusion by category, under Materials and Finishes, click in the Material field, click , and specify a material. To assign a solid extrusion to a subcategory, under Identity Data, for Subcategory, select a subcategory. Click Apply.

How do you fill a void in the wall?

What is void treatment?

Here’s How Our Wall and Void Treatment TM Works: Our technicians treat by removing wall switch plates, plumbing accesses, and finding other entry points that lead directly into your walls. We then treat those areas with specially formulated dusts and baits that bugs feed on or are exposed to and die.

How do you fill a hollow wall?

How do you create a void?

1. On the Create tab Draw panel, select one of the drawing tools.
2. Click in the drawing area, and draw a closed loop that intersects solid geometry.
3. Select the closed loop.
4. Click Modify | Lines tab Form panel Create Form drop-down (Void Form).