How to show hidden line in revit?

On the View tab, select Show Hidden Lines. Next, select the element in front, and then select the element behind to show its hidden lines. Select each obscuring element individually to show hidden lines. Use the Remove Hidden Lines tool to reset the elements.

Furthermore, why are hidden lines not showing in Revit? Sometimes however, they do not show at all even though the view depth is set correctly. If this happens check the View Properties palette and ensure that the view discipline is set to Structural and that the Show Hidden Lines setting is set to either By Discipline or All as required.

Beside above, what is hidden line in Revit? Model and detail elements that are obscured by other elements can be displayed using the Show Hidden Lines tool. You can use the Show Hidden Lines tool on all elements that have the Hidden Lines subcategory.

In this regard, how do you make a line invisible in Revit?

Also the question is, why are my model lines not showing up in Revit? Since the phase is set to new construction it automatically puts all the model line work on new construction (not on existing phase), so the linework won’t show because we have the phase filter set to show previous and demo, so it won’t show any new construction.

1. At the Command prompt, enter HLSETTINGS.
2. In the Hidden Line Settings dialog box, change the settings and click OK.

What is a hidden line?

A hidden line, also known as a hidden object line is a medium weight line, made of short dashes about 1/8” long with 1/16”gaps, to show edges, surfaces and corners which cannot be seen. Sometimes they are used to make a drawing easier to understand. Often they are omitted in an isometric view. Section Line.

How do you show hidden lines in Inventor?

1. Right-click the view.
2. Click in the drop-down menu Edit View
3. In the dialog box Drawing View click on the Hidden Line button.
4. If you see this icon. , it means that you have activated the checkbox on Style above the buttons.
5. After clicking the OK button, you should see the hidden lines, in the view(s).

How do you draw a invisible line?

How do I hide lines between walls in Revit?

1. Go into Visibility Graphics, the keyboard shortcut is “VG”.
2. On the tab “Model Categories” scroll down to walls and Expand.
3. Under “Walls” you will see “Common Edges”, untick this.
4. Click OK.

Where is the line work tool in Revit?

Click Modify tab View panel (Linework). Click Modify | Linework tab Line Style panel, and select the line style to apply to the edge from the Line Style drop-down. For information about defining and modifying line styles, see Line Styles.

How do you show detail lines in Revit?

How do you unhide a section in Revit?

Select the element. Do one of the following: Click Modify | tab Reveal Hidden Elements panel (Unhide Element) or (Unhide Category). Right-click the element, and click Unhide in View Elements or Category.

How do I find model lines in Revit?

1. Click (Model Line).
2. Click Modify | Place Lines tab Draw panel, and select a sketching option or Pick Lines to create lines by selecting lines or walls within the model.

How do you use hidden lines?

How do I make linetype visible in AutoCAD layout?

1. Enter LINETYPE to open Linetype Manager.
2. Click Show Details.
3. Deselect Use Paper Space Units for Scaling.
4. Click OK.
5. Double-click into the viewport to activate it.
6. Enter REGEN.

Why can’t I see my lines in AutoCAD?

Select the System tab and click Graphics Performance. Leave Hardware Acceleration on, but uncheck the other options, as pictured below. Click OK, and try adjusting the lines again.

How do I find hidden lines?

Which line is used to represent a hidden feature in a drawing?

It is standard practice to use dashes to represent any line of an object that is hidden from view.

Why hidden lines and center lines are used?

Hidden lines in a drawing represent the edges where surfaces meet but are not directly visible. Hidden lines are omitted from pictorial drawings unless they are needed to make the drawing clear. Figure 3.46 shows a case in which hidden lines are needed because a projecting part cannot be clearly shown without them.

How do you show hidden lines in Catia?

Near the middle of the tool is a “More” button. Click that to expose a few more search options. From the Line Properties section, pull down on the menu that allows you to define the hidden line type.

How do you show hidden lines in solid edge?

Right-click the drawing view and select Properties. Select the Show Hidden Edges tab. Select a feature or component from either the drawing view or the FeatureManager design tree to add it to the list of items to be shown with hidden lines.

How do you show hidden lines in Freecad?

Showing hidden lines is controlled at the View level. Look at the “HLR Parameters” section on the”Data” tab in the PropertyEditor. You want to turn on “Hard Hidden” lines.

What is a phantom line?

Lines that are made visible as dots or dashes to reveal the edges of objects currently hidden from view.

What is a visible line?

Visible lines are the edges or “outlines” of an object. They are drawn as solid lines with a thick/heavy weight.

What is short break line?

Short break lines are thick, wavy solid lines that are drawn freehand. When either of these break lines is used to shorten an object, you can assume that the section removed from the part is identical to the portions shown on either side of the break. (thin and long with a zigzag)